Transform your bike in no time at all from a lightweight bike for sporty tours into a transport bike for shopping and commuting – this way you stay completely flexible. Fifteen seconds is all it takes to mount the practical luggage rack and only five seconds to remove it again. The struts with a diameter of 10 mm support a payload of up to 20 kilograms. The Quick-Rack is of course suitable for use with all of our fixation systems so that you can combine it with any ORTLIEB bag. Thanks to the two hanging levels and a platform, you can also use and fasten panniers and a basket at the same time. The optional mudguards make sure that you keep dry and clean in bad weather too.

• Lightweight luggage carrier with quick release system for fast mounting and dismounting on the bike
• 5/15 method, 15 seconds for mounting, 5 seconds for dismounting
• Quick change from sporty bike to commuter bike
• Leaves a clean bike, no fixed luggage rack
• Can be used on carbon seat posts and carbon frames with M5 or M6 threads
• Can be used on full-suspension bikes
• Universally adaptable thanks to different strut lengths
• Touring rack with two mounting levels, e.g. for simultaneous use of basket and side panniers
• Enables direct attachment of all bags with QL1/2.1/3.1 and Top-Lock system
• Integrated threads for direct mounting of QL3.1 snap-in knobs
• Suitable for wheel sizes up to 29“/(2.6”) when mounted via an adapter axle; up to 2.9“/3” when mounted directly or with Seat Stay Adapter
• Horizontal and vertical struts with 12 mm tube diameter
• Luggage carrier platform with 10 mm tube diameter
• Incl. mounting kit; no additional mounting parts required
• Preparation for optional rear light (light not included)
• Maximum payload 26 kg

Contents: Rack with mounting material and additional extra long mounting stay (300 mm), Mounting bracket for optional rear light, QL3/QL3.1 mounting clamps

Optional accessory: Quick-Rack Mudguard 38 mm (F78107), 50 mm (F78108) and 72 mm (F78109), Quick-Rack Seat Stay Adapter (F78106); Thru Axle M6-Connector 1mm (F78112), 1,5mm (F78113), 1,75mm (F78114)*
Note: Follow mounting instructions.
Note: For mounting the mudguard, we recommend using the cable ties included in the package on the front mounting bridge.
Attention: Rack is not suitable for mounting and using child seats; To prevent scratches and paint damage, please use frame protection film on the contact points.

Height: 43 cm
Width: 21 cm
Depth: 38 cm
Load: 26 kg
Weight: 780 g